Closed Column Pressure Extractor 150 Gram
DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well ventilated areas. DO NOT USE INDOORS**
- Closed Column Pressure Extractor (Comes with 1 yr. Limited warranty, excludes gaskets and screens)
- This system allows the user to build up solvent pressure by closing the valve, pulling a vacuum and filling the extractor, Extractor will fill about 85% with solvent before the internal pressure will equal the pressure of the can propellant.
- The solvent can will fit into either port with a tip adapter supplied with some butane cans, tip adapter required, not included
- Solvent Soak is expected to be between 30-90 min,but this all depends on material, starting with frozen cans of solvent is recommended
This system allows the user to soak the material before opening the bottom valve to release the solvent and oil.
-Platinum Cure Silicone Non Stick Pad
-304 Stainless Material Tube
-304 Stainless Barb/Flare End Caps w/ Heavy Duty Miniature Ball Valves
-(1)Viton 100 Mesh (150 Micron Gasket)
Dimensions (Inches): 2" x 18" Diameter Tube
Weight: 6-10 lbs.
Operating Temperature Range: -30-200F
Construction: All components made of 304 Stainless Steel.
Intake Fittings: Flare Fitting where Can tip adapter will fit in.
High Polish Interior
(Rated to 500psi, Working pressure will only reach 40-50 PSI when using solvent cans)
Stainless Steel 1/4 flare; and 1/4 Barb port.
Gaskets are designed for Oil Processing.Temp range -30-200F